|
These instructions assume you have already set up a
regular dialup connection to Cruzio.
Windows XP/2000:
1) If you have Windows XP: Click on the "Start" menu, then
"Connect To", then "Show All Connections".
Note: If you don't see "Connect To", go to "Control Panel",
then "Network Connections".
If you have Windows 2000: Click on the "Start" menu, then "Settings",
then "Network and Dial-up Connections".
2) Single-click on the "Cruzio" icon and click "Change
settings of this connection".
3) Click on the "General" tab.
4) Click the checkbox next to the additional modems available in the "connect
using" dialogue window.
Note: If there are no other modems to select there may be a problem with
the installation of your second modem.
5) Click the checkbox next to "All devices call the same number".
6) Click the "OK" button to save the new settings and close
the window.
» back to top
Windows 95/98/ME:
1) Double-click on the "My Computer" icon on your desktop,
then double-click on the "Dial-up Networking" icon.
2) Single-click on the "Cruzio" icon and click "Change
settings of this connection".
3) Click on the "Multilink" tab.
4) Click "Use Additional Devices".
5) Click the "Add" button and select the modem from the drop
down menu.
Note: If no modem is available there may be a problem with the installation
of your additional modem.
6) After the additional modem is listed, click the "OK" button
to save the new settings and close the window.
» back to top
Cruzio provides these instructions as
a service to our users. If you have any feedback or suggestions on how
to improve these, please send email to support@cruzio.com
©2003 Cruzio
|
